Product Details
- Model: #1767
Features
- Positive Voltage Regulator
- Small Package
- Positive 9 Volts Output
- Up to 1 Amp out
- Accepts AC or DC inputs
Product Description
This is the +9v Power Supply Kit. It is a fixed, Positive 8 Volt Power Supply designed for the 7800 series of Voltage Regulators. It includes a 1amp Bridge Rectifier with 2 large Aluminum Electrolytic Capacitors for initial filtering. There is also a .1uF cap for some noise filtering and a 1K bleeder resistor across the filter capacitors. The output has a small filter cap and a Red LED with a 470 Ohm current limiting Resistor. It will fit any TO-220 Positive Voltage Regulator such as the LM7805 or the LM7812 or any other of the 7800 series Positive Voltage Regulators. You can use the 78M00 series also. It will actually fit pretty much any 3-Terminal Positive Voltage Regulator, even the TO-92 ones.
It will convert an AC input (max 20vac) into a DC output. The AC input requires a step-down transformer if you are going to connect to your AC line. Do not connect the PCB directly to the AC Line Voltage. It will also convert a DC input into a smaller DC output. This is an extremely versatile PCB. A heat-sink may be required to keep the Voltage Regulator cool, it is NOT supplied with this kit.
The PCB is double-sided, plated thru-hole, 1.20" long x 2.10" wide made of .062" FR-4 epoxy glass. It has green Solder Mask (LPI) on both sides with white Silk Screen on the Top side and it comes with 4 mounting holes. The Voltage Regulator is located near one edge so that it may be heat-sinked if needed.
This kit does not include the tools you will need to assemble the circuit. You will need tools such as a soldering iron, solder, wire cutters, etc.
Customer Reviews
Most helpful customer reviews
See all customer reviews...
0 komentar:
Posting Komentar