Go Power! GP-SW600-12 600-Watt Pure Sine Wave Inverter

Go Power! GP-SW600-12 600-Watt Pure Sine Wave Inverter

Code : B00153CXR4

Category :

Rating :

SPECIAL PRICE

* Special discount only for limited time

Product Details

• Amazon Sales Rank: #89450 in Automotive
  
• Brand: Go Power!
• Model: GP-SW600-12
• Number of items: 1
• Dimensions: 5.00" h x
  9.50" w x
  13.75" l,
  5.90 pounds
  

Features

• 600 watt continuous pure sine wave inverter 12 volt input
• 860 watt surge
• 2 GFCI protected outlets to plug into
• Over voltage, under voltage and overload protections
• 2 Year warranty

Product Description

Go Power! 600-Watt Pure Sine Wave Inverter takes 12 volt DC battery power and converts it to an exact replica of AC houshold power. It is guarenteed to run any load within their wattage range and has a 2 year warranty. This inverter has two GFCI outlets and can use the GP-DC-KIT2 to connect to the batteries with ease. As long as the load is not greater then 600 watt this inverter will run it and the GP-SW600-12 can surge to 860 watt as well as contains all instruction required.

Customer Reviews

Most helpful customer reviews

24 of 24 people found the following review helpful.
GPSW-600-12 video review
By Reverand
Watch Video Here: http://www.amazon.com/review/R17J473VO1S0GU This is a product review of the GPSW-600-12. It shows the inverter from all angles and shows how to hook the inverter to a battery using the Go Power! DC installation kit (GPDC-Kit2). It shows the inverter being overloaded with 1000 watts and how to reset the inverter after being overloaded. It also shows the GPSW-600-12 running 800 watts of Light bulbs continuous. It also shows a large drill being used off of the inverter as well as a skill saw. It also shows the UL (Underwriters Labratories) listing that the inverter has.

4 of 4 people found the following review helpful.
600 watt inverter
By brian
Larger and heavy than expected. Installation was a snap with kit installed with 6 12V batterys in my fifth wheel.

2 of 2 people found the following review helpful.
So far so good
By John
I am using this inverter for continuous duty, electronics support. I'm very pleased with the performance thus far. It uses quality external components. It does emit a high frequency whine like most inverters of this type. You will need an enclosure with an STC (Sound Transmission Class) of about 45 to isolate the noise. Search wikipedia.com for an explanation. GFCI is also a nice plus. Overall, I'm very pleased with this purchase.

See all 4 customer reviews...