500W Wind Grid Tie Inverter AC 10.8-30V To AC 110V Turbine Power Dump Load

500W Wind Grid Tie Inverter AC 10.8-30V To AC 110V Turbine Power Dump Load

Code : B007WQDKMA

Category :

Rating :

HOT PRODUCT TODAY

* Special discount only for limited time

Product Details

• Brand: mass power
• Model: Wind-500G-WAL

Features

• Total Harmonic Distortion(THD):<5%;AC Output Frequency Range:46Hz ~ 65Hz
• Power Factor:0.99;AC Input Voltage Range : 10.8V ~ 30V(AC, not DC),Peak Inverter Efficiency: 92%;Standby Power consumption: <0.5W
• Output Current Waveform: Pure Sine-wave;MPPT Function; Over Current Protection; Over Temperature Protection
• Reverse Polarity Protection; Island Protection; Stackable;Operating Temperature Range -10 ~ 45 degrees C ;
• Package Includes：Power inverter and Power cord Package Includes：Power inverter and Power cord

Product Description

More Models are available

SUN-250G: B004TVEF8Y, Wind-250G: B008BDAQDY

Sun-300G: B005N2WHDI, Wind-300G (10.8V ~ 30VAC) : B007WQBK2C, Wind-300G (10.8V ~ 30VDC): B005N2OLZU

Sun-500G: B008CNM1SQ, Sun-S500G-HI: B005N29SGM

Wind-500G-HI (22V ~ 60VAC): B007X0L2C0

Wind-500G (10.8V ~ 30VDC): B005N2ST9E, Wind-500G (22V ~ 60VDC): B007X0OVGO

Sun-600G: B007XAEINU, Sun-600G -HI (10.8V ~ 30VDC): B005N2VLO4

Sun-1000G-HI (10.8V ~ 30VDC): B007XAP0V4

Preface

This model grid-tie has build in bridge rectifier and dump load controller,it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can't keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.

There are 5 terminals on the left side of the inverter, 3 red terminals will be connected to the three phase output from the wind turbine,2 black terminals will be connected to dump load resistors.

There are 4 LED indicators, 3 green indicators and 1 red indicator, 3 green LED indicators will start to cycle from left to right when the grid and AC input supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the wind turbine. The bigger the output power is, the faster the rate is.

Specifications:

Normal AC Output Power:450w

Maximum AC Output Power:500w

AC Output Voltage Range:90v-130v

Package Includes：Power inverter and Power cord

Customer Reviews

Most helpful customer reviews

0 of 1 people found the following review helpful.
Requires a lot of power but works slick
By Chase
The turbine needs to put out much more voltage to kick in and sinc to the grid than the controller for charging the batteries that came with the turbine requires for it to start charging the batteries.

See all 1 customer reviews...