Product Details
- Amazon Sales Rank: #36170 in Automotive
- Color: Black
- Brand: Schumacher
- Model: SE-3000
- Dimensions: 20.00" h x
14.00" w x
14.00" l,
41.25 pounds
Features
- Includes a specialized single rotary switch which adjusts to all volt ranges
- 200-amps help engines for emergency starting
- No necessity to charge 18 and 24-volt batteries separately
- Equipped with cooling fan for high-performance and long life
- Capacity to charge 6, 12, 18 and 24-volt batteries
Product Description
This manual fleet battery charger is heavy-duty and is made exclusively for fleet and industrial use. It has a capacity to charge 6, 12, 18 and 24-volt batteries so there is no need to charge 18 and 24-volt batteries separately. Full power engine start is available in each volt range and its 200-amps help engines for emergency starting under severe conditions. It has an 80-amp rate for 6-volt battery systems, a 65-amp rate for 12-volt battery systems, a 57-amp rate for 18-volt battery systems, and a 30-amp rate for 24-volt battery systems. It includes a specialized single rotary switch which adjusts to all volt ranges.
Customer Reviews
Most helpful customer reviews
12 of 12 people found the following review helpful.
By Chris
I needed a charger for a large set of deep cycle batteries, something that would put out lots of amps continuously. And of course I didn't want to spend a lot of money. This charger has worked great, met all my expectations.But understand what it is, a big heavy manual charger. Left on it's highest setting it will fry all but the biggest batteries. But if you have big batteries, 600 amp hours or bigger, it's great. That's amp hours, not CCA or cold cranking amps.Why only 4 out of 5 stars? Two flaws. Two of the sheet metal screws on the outside are stripped, easy to fix. The other flaw is worse. The cables are only 6 gauge. If you use the charger at full potential, outputting 60-80 amps, for more than 30 minutes the cables get hot. Once the cables started smoking, melting the insulation, luckily I noticed and turned off the charger. This thing should have a least 4 gauge cables.But I think most people will use it on car batteries, so the hot cable issue shouldn't be a problem.
8 of 8 people found the following review helpful.
By Wizaard
The battery charger works wonderfully and it contains the desired features, but the sheet metal box isn't very sturdy. Like other chargers I've seen at various stores, the manufacturer saved a few pennies by using a light gauge sheet metal. The first item delivered was dented even though the shipping box didn't appear to have any damage. The return and exchange was quite easy. I still had the first one when the replacement item arrived several days later. The second item was also damaged. Luckly, I could assemble one good item out of the two I received.
6 of 6 people found the following review helpful.
By firender
Ordered two of these for local fire dept. they have trucks with 6 volt all the way up to 24 volt starting systems and one charger is easier to keep track of than four different voltage ones. A couple things i recommend after using this charger are: keeping an eye on the clamps they get hot on high charging rate with high CCA battery, and on 6 volt low it is not a trickle charger, so don't leave timer on to long. All that said it is a good value for a small fleet or farm in a big charger.
0 komentar:
Posting Komentar