Product Details
- Brand: mass power
- Model: sun-s250g
Features
- Normal AC Output Power:200W; Maximum AC Output Power:250W
- AC Output Voltage Range: Switch is at 230V Position, 190V ~ 260V,Switch is at 115V Position,90V ~ 130V
- DC Input Voltage Range: 10.8V ~ 30V
- AC Output Frequency Range: 46Hz ~ 65Hz. Peak Inverter Efficiency: 92%
- Features:MPPT Function/Over Current Protection/Over Temperature Protection/Reverse Polarity Protection/Island Protection/Stackable
Product Description
More Models are available
Wind-250G: B008BDAQDY
Sun-300G: B005N2WHDI, Wind-300G (10.8V ~ 30VAC): B007WQBK2C,Wind-300G (10.8V ~ 30VDC): B005N2OLZU
Sun-500G: B008CNM1SQ, Sun-S500G-HI: B005N29SGM
Wind-500G (10.8V ~ 30VAC): B007WQDKMA, Wind-500G-HI (22V ~ 60VAC): B007X0L2C0
Wind-500G (10.8V ~ 30VDC): B005N2ST9E, Wind-500G (22V ~ 60VDC): B007X0OVGO
Sun-600G: B007XAEINU, Sun-600G -HI (10.8V ~ 30VDC): B005N2VLO4
Sun-1000G-HI(22V ~ 60VDC): B007XAPDLQ
Specification:
Normal AC Output Power: 200W
Maximum AC Output Power: 250W
AC Output Voltage Range: Switch is at 230V Position: 190V ~ 260V
Switch is at 115V Position: 90V ~ 130V
AC Output Frequency Range: 46Hz~65Hz
Total Harmonic Distortion (THD): <5%
Power Factor: 0.99
DC Input Voltage Range: 10.8V ~ 30V
Peak Inverter Efficiency: 92%
Standby Power consumption: <0.5W
Output Current Waveform: Pure Sine-wave
Dimension:220mm*170mm*60mm
Introduction:
The only plug and play small grid tie photovoltaic system;the stackable small grid tie photovoltaic system
Installation:
The individual system of SGPV is shown in Figure 2
Installing the solar panel of the SGPV at a suitable location that sunshine can irradiate on it.
Connecting the cables of the solar panel to the DC input terminals of the small grid tie inverter of the SGPV,inserting the plug of the inverter into the socket of the home grid.
After this,when the sun shines, the SGPV will convert the solar energy to the home grid.
Package :
Power inverter,User Manual and Power cord
Customer Reviews
Most helpful customer reviews
2 of 3 people found the following review helpful.
Works well
By David Buuck
Used it with an older (stored) Yingli mono-Si PV module. Works as described, including self-protection modes.Maximum power point was measured at 20VDC as set by the inverter. MPP from the module spec is 23.5 VDC at 7.6 ADC (178.6 WDC @ module MPP). Open circuit voltage was measured at 28VDC.
0 of 0 people found the following review helpful.
Busted as soon as i got it.
By Alberto Balderas
It worked well for a few days. It blew a capacitor when i connected to my wind generator. Its probably my fault but documentations are very hard to find. I'm fixing this one my self.
0 komentar:
Posting Komentar