500W Wind turbine Grid Tie Inverter DC22-60V Stackable

Advertisement
advertisement
500W Wind turbine Grid Tie Inverter DC22-60V Stackable
500W Wind turbine Grid Tie Inverter DC22-60V Stackable

Code : B007X0OVGO
Category :
Rating :
SPECIAL OFFERS
* Special discount only for limited time










Product Details

  • Brand: mass power
  • Model: S500G-WDL-HI

Features

  • Total Harmonic Distortion(THD):<5%;Power Factor:0.99;AC Input Voltage Range :22V ~ 60V(AC, not DC)
  • Peak Inverter Efficiency:92%;Standby Power consumption:<0.5W
  • Output Current Waveform:Pure Sine-wave;MPPT Function;Over Current Protection
  • Over Temperature Protection;Reverse Polarity Protection;Island Protection;Stackable
  • Package Includes:Power inverter and Power cord;Operating Temperature Range:-10 ~ 45 degrees C











Product Description

More Models are available

SUN-250G: B004TVEF8Y, Wind-250G: B008BDAQDY

Sun-300G: B005N2WHDI, Wind-300G (10.8V ~ 30VAC) : B007WQBK2C, Wind-300G (10.8V ~ 30VDC): B005N2OLZU

Sun-500G: B008CNM1SQ, Sun-S500G-HI: B005N29SGM

Wind-500G (10.8V ~ 30VAC): B007WQDKMA, Wind-500G-HI (22V ~ 60VAC): B007X0L2C0

Wind-500G (10.8V ~ 30VDC): B005N2ST9E

Sun-600G: B007XAEINU, Sun-600G -HI (10.8V ~ 30VDC): B005N2VLO4

Sun-1000G-HI (10.8V ~ 30VDC): B007XAP0V4

Preface

This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can't keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.

There are 4 terminals on the left side of the inverter, one red terminals and one black will be connected to the phase output from the wind turbine, and 2 black terminals will be connected to dump load resistors.

There are 4 LED indicators, 3 green indicators and 1 red indicator, 3 green LED indicators will start to cycle from left to right when the grid and AC input supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the wind turbine.

The bigger the output power is, the faster the rate is.

Electrical Specifications

Normal AC Output Power: 450W

Maximum AC Output Power:550W

AC Output Voltage Range: 90V ~ 130V

AC Output Frequency Range: 46Hz ~ 65Hz








Customer Reviews

Most helpful customer reviews

0 of 2 people found the following review helpful.
1Unit fried on high wind
By Rover
Unit fried after 2 weeks on high wind. My turbine is 300W and this 500W inverter can't cope. Burned my money and time.

See all 1 customer reviews...


Advertisement
advertisement
500W Wind turbine Grid Tie Inverter DC22-60V Stackable | Unknown | 5

0 komentar:

Posting Komentar