Product Details
- Dimensions: 5.43" h x
2.17" w x
10.43" l,
3.75 pounds
Product Description
Build In Dump Load Controller
Build In High Wind Protection
The grid-tie inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid.
This model grid-tie has designed for wind turbines. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter . It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can't keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.
For the AC output 3 phase wind turbine system ,There are 5 terminals on the left side of the inverter, 3 terminals will be connected to the AC output from the wind turbine, and 2 black terminals will be connected to dump load resistors.
Detailed specification:
Model: GTI-W300
AC Output Continuous Power: 270W
AC Output Max. Power: 300W
AC Output Voltage Range:
Switch at 230V Position: 190V ~ 260V
Switch at 115V Position: 90V ~ 130V
AC Output Frequency Range: 46Hz ~ 65Hz
Total Harmonic Distortion(THD): <5%
Power Factor: 0.99
Input AC Voltage Range ( Optional ): 22V- 60V
Peak Inverter Efficiency: 92%
Standby Power Consumption: <0.5W
Output Current Waveform: Pure Sine-wave
Recommend dump load resistor: 3 ohm/300w
Product Size/pc: 265 * 138 * 55mm
Package Size/pc: 295 * 190 * 100mm
N.W./pc: 1.7kgs
G.W./pc: 2kgs
Customer Reviews
Most helpful customer reviews
See all customer reviews...
0 komentar:
Posting Komentar